User guide

MTPSR2-201 87
Chapter 8 - ProxyServer Management
Dial-Out
The dial-out option (Option 1) enables a Telnet user to configure WAN port 2 (only) for a dial-out
session. The default configuration of 115200 bps, 8-N-1 can be used for the dial-out session, or the
user can specify each parameter for the port (i.e., the baud rate, number of data bits, parity, or
number of stop bits). When the connection is established, anything entered on the keyboard is
immediately presented to WAN port 2. When the dial-out session is over, WAN port 2 reverts to its
original configuration.
ProxyServer Management
The ProxyServer Management option (Option 2) provides three options; Proxy Statistics, System
Information, and Reset (the) ProxyServer. The ProxyServer statistics option enables you to view
stats on the ProxyServer, Ethernet port, WAN port, etc. The system information option enables you to
view the Ethernet port address, uptime, firmware version, memory size, etc. The reset option enables
you to reset the ProxyServer; this reboots the ProxyServer and closes the Telnet connection.