User guide

8
DSU ProxyServer User Guide
MTPSR2-201
Front Panel Description
The front panel, shown in Figure 1-2, contains four groups of LEDs that provide the status of the
Ethernet connection, 56K DSU port, WAN port, and general status of the ProxyServer. The Ethernet
LEDs indicate the status of LAN activity. The 56K DSU LEDs indicate the status of the internal DSU
port (WAN 1). The WAN Link LEDs indicate the status of the external Data Communications
Equipment (DCE) device connected to WAN 2. There are also two LEDs which indicate whether the
self test passed or failed (Fail) and if the power On/Off switch on the back of the ProxyServer is
turned On (Power).
RD
TD
CL
LK
RD TD CD NS OS RD TD CD
V35
Figure 1-2. Front Panel
ETHERNET
RD Receive Data indicator blinks when packets are being received from the Local Area
Network (LAN).
TD Transmit Data indicator blinks when packets are being transmitted to the LAN.
CL Collision indicator lights when a collision is detected on the Ethernet link.
LNK Link indicator lights when the ProxyServer is connected to the LAN.
56K DSU
RD Receive Data indicator blinks when packets are being received from the Wide Area
Network (WAN).
TD Transmit Data indicator blinks when packets are being transmitted to the DSU (WAN 1).
CD Carrier Detect indicator lights when a carrier signal is detected on the DSU (WAN 1) link.
NS No Signal indicator lights when the ProxyServer is unable to detect a signal on the DSU
(WAN 1) port.
OS Out of Service indicator lights when the DSU port is out of service.
WAN Link
RD Receive Data indicator blinks when packets are being received from WAN 2.
TD Transmit Data indicator blinks when packets are being transmitted to WAN. 2
CD Carrier Detect indicator lights when a carrier signal is detected on the WAN 2 link.
V35 V.35 indicator lights when internal shunt is set for V.35 operation.
Fail
The Error indicator lights when the ProxyServer is booting or downloading setup.
Power
The Power indicator lights when power is applied to the ProxyServer.
Back Panel Description
The cable connections for the ProxyServer are made at the back panel. Connectors include Power,