User guide

79
Chapter 6 - RAS Dial-Out Redirector
MTPSR2-201
and Password (optional) in their respective fields. Click OK when finished.
ComMap saves these login parameters in your COMMCSI.INI file.
Note: You cannot directly edit the COMMCSI.INI file using a text editor because the
password field is encrypted.
4. If you have not logged into the network, do so now by clicking File | Login, or click the
Login button. The MCSI Login window is displayed.
The Available Servers box lists the names of the available servers. Click the name of
the server to which you want to attach, type a User Name and Password in their
respective fields, and then click Login. A window is displayed stating that your login was
successful. Click OK. If there are no servers listed in the Available Servers box, then
click the Search button to search for a server.
5. At the ComMap for Windows main window, view your log status by clicking File | Log
Status. The MCSI Login Status window is displayed.
This window shows the name of the server to which you are logged in and the name with
which you logged in. Click Close when you are finished.
6. At the ComMap for Windows main window (to map a COM port through MCSI) click
Map | Map. The COM Port to MCSI Mapping window is displayed.