User guide

67
Chapter 5 - Client Setup
MTPSR2-201
16 In the Host Name field, type your user name (i.e., jerry).
17 In the Domain field, enter your company’s domain name (usually the company name
followed by one of the following extensions: .com, .edu, .gov, .org, .mil, or .net. For example,
multitech.com).
18 In the DNS Server Search Order group, click Add. The TCP/IP DNS Server dialog is
displayed.
19 In the DNS Server field, place the cursor in the first group and type the IP address of your
LAN’s DNS server (provided by your network administrator).
20 Click Add. You are returned to the Microsoft TCP/IP Properties dialog, DNS tab, and the
new address appears in the DNS Search Order list.
Your network may have more than one DNS server, allowing you to use a secondary DNS
server if the primary DNS server is not available. If this is the case, add the IP address of the
secondary DNS server using the same procedure as with the first.
Note: The address that appears first (at the top) of the list is the primary server (the first one
searched). You can use the Up and Down buttons to rearrange the items in the list, if
necessary, until the primary DNS server is listed first.