User guide

65
Chapter 5 - Client Setup
MTPSR2-201
9 Click the IP Address tab.
The IP addressing method depends on how your ProxyServer’s DHCP Server option was
configured. If DHCP Server is active, your IP address is issued automatically. If your network
administrator did NOT activate DHCP Services on the ProxyServer, you will have to assign
your IP address manually.
Verify the ProxyServer/DHCP status with your network administrator, then proceed to step 10
for DHCP assigned addressing, or to step 11 for manual addressing.
10 If DHCP Services are active on the ProxyServer (the default), verify that the Obtain an IP
address from a DHCP server option is enabled (checked). At this point, you are done. Go to
step 21 and attempt to open an Internet session.
11 If DHCP Services are NOT active on the ProxyServer, you will have to manually enter your
IP address. Select manual addressing by clicking the Specify An IP Address option. The IP
Address and Subnet Mask fields become active.