User guide

57
Chapter 5 - Client Setup
MTPSR2-201
7 Select the IP Address tab.
The IP addressing method depends on how your ProxyServer’s DHCP Server option was
configured. If DHCP Server is active, your IP address is issued automatically. If your network
administrator did NOT activate DHCP Services on the ProxyServer, you will have to assign
your IP address manually.
Verify the ProxyServer/DHCP status with your network administrator, then proceed to step 8
for DHCP assigned addressing, or to step 9 for manual addressing.
8 If DHCP Services are active on the ProxyServer (default), verify that the Obtain an IP
address automatically option is selected. You are done; go to step 18 to reboot your PC
and attempt to open an Internet session.
9 If DHCP Services are NOT active on the ProxyServer, you will have to manually enter your
IP address. Select manual addressing by clicking the Specify an IP address option. The IP
Address and Subnet Mask fields become active.