User guide

DSU ProxyServer User Guide

MTPSR2-201

2 If TCP/IP is listed, proceed to step 3; otherwise, refer to Installing TCP/IP (Win95/98), at the

end of this section.

3 Check for binding between the adapter and TCP/IP. In the Network dialog, click your

Ethernet adapter to select it, then click Properties to display the Adapter Properties window.

4 Click the Bindings tab, then if necessary click the box to the left of TCP/IP so this entry is

enabled (checked).

Note: There may be other protocols listed and enabled under your Ethernet adapter. This

does not affect the TCP/IP protocol. Rather, it simply means your computer will accept

messages using those protocols as well as TCP/IP.

5 Click OK to return to the Network dialog.

6 Select TCP/IP, then click Properties to open the TCP/IP Properties window.