User guide

50
DSU ProxyServer User Guide
MTPSR2-201
WAN Device Configuration
You can configure an external modem connected to WAN Port 2 of the ProxyServer by selecting the
WAN Device Configuration command from Start | Programs | ProxyServer 2.10 | Wan Device
Configuration (Windows 98/95 or Windows NT) or from the ProxyServer 2.10 program group
(Windows 3.1x).
The ProxyServer Setup - Connect to WAN Device screen is displayed, overlaid on the Print
Console screen.
Select WAN Port 2, then click OK and the ProxyServer Print Console screen indicates you are
connected to WAN Port 2 and can now enter AT commands.