User guide

48
DSU ProxyServer User Guide
MTPSR2-201
Running Diagnostics
The ProxyServer is equipped with a built-in diagnostics utility that can be accessed through the COM
port of your PC (remote users cannot access diagnostics). Click Built-in Test in the Proxy Setup
menu and the Diagnostics dialog is displayed.
In the Test Port group (Ethernet, WAN 1 or WAN 2), select the port where you want to run
diagnostics, install the appropriate loopback plug on that port, then click Test to start the test.
Note: Test will FAIL unless a loopback plug is used on the port you are testing.
For more details concerning the diagnostics dialog box and port testing, refer to the Helps.