User guide

38
DSU ProxyServer User Guide
MTPSR2-201
The master control for MLPPP is on the right-hand side of the dialog box, and the default setting is
disabled (unchecked). To implement MLPPP, first enable (check) the MultiLink PPP (MLPPP)
option. Once MLPPP is enabled, you need to configure the individual WAN ports. The WAN 1 and
WAN 2 tabs allow you to configure the individual ports for separate use (i.e., non-MLPPP) or in
bonded use, as with MLPPP. Select each tab, and enter the identical User Name and Password, for
each port and a Dial Number for WAN 2 only.
Once this is done, click OK and you will be returned to the Proxy Setup menu.
Enabling MLPPP also affects the WAN Setup dialog box. If you click the WAN button, you will notice
that the Port Type group has been set to Dial Out Only and Proxy Enable.
The rest of the Port Type options are inactive (grayed-out). When MLPPP is disabled, all the Port
Type options become active again.