User guide
32
DSU ProxyServer User Guide
MTPSR2-201
MTPSR2-201
T1,
Frame Relay,
V.90/K56Flex,
ISDN
Hub
Router
IP Address - 192.168.2.1
Subnet mask - 255.255.255.0
WAN Local - 200.2.10.1
WAN Remote - 200.2.10.2
Default Gateway - 192.168.2.6
MTPSR2-201
IP Address - 192.168.2.6
Subnet mask - 255.255.255.0
Router
IP Address - 200.1.1.1
Subnet mask - 255.255.255.0
WAN Local - 200.2.10.2
WAN Remote - 200.2.10.1
Client PC
Remote Network
Client PC
IP Address - 200.1.1.10
Subnet mask - 255.255.255.0
Default Gateway - 200.1.1.1
Local PC
Local PC
IP Address - 192.168.2.10
Subnet mask - 255.255.255.0
Default Gateway - 192.168.2.6
Hub
Static Route
IP Address - 200.1.1.0
Gateway Address - 192.168.2.1
Address Mask - 255.255.255.0
Metric - 1
Port - LAN
Router
Router
Internet
10BASET COMMAND56K DSU POWER
ON
OFF
RS232/V.35
Figure 4-1. Application Showing Static Routes
From the IP Setup dialog box, click the Static Routes button to display the Static Routes dialog
box, which enables you to view, add, edit, or delete static routes to a target IP address (which can be
the address of an IP host, an IP network, or an IP subnetwork).
Click Add to display the Static Routes Setup dialog box where you can configure a new static route.
Note: You can also edit or delete static routes by clicking the Edit or Delete button.
The Static Routes Setup dialog box is displayed. Select and key in the appropriate information for
setting up the static route between the ProxyServer and the remote client PC.