User guide

29
Chapter 4 - ProxyServer Software
MTPSR2-201
Proxy Setup
All changes to your ProxyServer configuration are initiated through the Proxy Setup dialog box or
main menu. To view or change your ProxyServer configuration in Windows 98/95 and Windows NT,
click Start | Programs | Proxy Server 2.10 | Proxy Server Configuration. You can also start the
Proxy Server setup from My Computer by double-clicking the Roucon (or Roucon.exe) icon in the
Proxy.210 folder on your local drive. After loading, the Proxy Setup menu will appear.
The Proxy Setup menu consists of 13 buttons, eleven of which allow you to display and change the
IP settings, define the WAN ports, change features such as the Internet, DHCP Server, Proxy Server,
and Virtual Servers, display Statistics on the WAN ports, control activation of Telnet, TFTP, and Web
servers and dumb terminal management, print messages received from the target ProxyServer, test
the communications link, and download setup information to the ProxyServer.
Note: The Built-in Test and Print Console buttons (which respectively enable you to test the
communications link and print messages received from the target ProxyServer) operate only if your
PC’s COM port is communicating directly with the target ProxyServer. They are gray (inoperable) if
you are communicating with the ProxyServer over your LAN.
Two buttons at the bottom of the screen enable you to open the Help system and end (Exit) a
ProxyServer configuration session.