User guide

DSU ProxyServer User Guide

MTPSR2-201

IP Wizard Setup

The IP Wizard Setup dialog box guides you through the process of assigning LAN and WAN IP ports

address information, and provides an option to use the ProxyServer’s built-in DHCP Server if your

LAN is not already running a DHCP Server which assigns (automatically) client IP addresses. If you

choose to enable the built-in DHCP server, you are given the option of also enabling the Domain

Name Server.

11 Follow the on-screen instructions to configure the IP Ports, DHCP Server, and Domain

Name Server.

12 Click the WAN 1 option in the Select Port window and the dialog box changes to provide

WAN Setup information.

Follow the on-screen instructions to configure WAN 1. If you choose to have one or both

WAN ports configured for Remote Access, click the Remote Access to be enabled?

check box, then enter the remote workstation’s IP address in the Remote Address field.

Then Highlight WAN 2 to configure the other WAN port.

Click OK when you are satisfied with the IP Wizard Setup and proceed to the Default

WAN Link(s) Setup screen.