User guide

21
Chapter 3 - Software Loading and Configuration
MTPSR2-201
Wizard Setup
The Wizard Setup screens enable you to input basic configuration information needed to configure
your ProxyServer. These screens guide you through the process of entering your LAN address, net
mask information and your WAN, DHCP Server, and Domain Name Server entries. All these entries
will also be displayed in their respective dialog boxes when accessed later from the Main menu.
9 Click Yes to download the wizard setup.
Clicking No takes you to the program group (icons) where you can choose any of eight
ProxyServer utility programs.
10 If you are configuring your ProxyServer over the network, the IP Address Reconfiguration
dialog box is displayed showing the default IP and MAC addresses of all detected
ProxyServers in the top window and a suggested IP address in the lower window.
In the top window, select the ProxyServer you want to configure, then check the IP
address in the lower window.
The suggested IP Address is only a proposed address, and you must verify that this
suggested address does not conflict with the IP address of any other device currently on
your network. If an address conflict exists, change the contents of this field to
assign a unique address to your ProxyServer.
Click OK when you are ready to continue.