User guide

19
Chapter 3 - Software Loading and Configuration
MTPSR2-201
5 Follow the on-screen instructions to install your ProxyServer software.
You can either choose the Destination Location of your ProxyServer software or select
the default destination by clicking Next>. If you click Browse, you can select a different
destination folder for your ProxyServer software; however, it is recommended that you
accept the default folder, c:\Proxy.210.
6 The next dialog box enables you to name the Program Folder for the ProxyServer files.
You can select the default name, Proxy Server 2.10, or name it anything you like; when
done, click Next> to continue.
7 The Proxy Server Setup dialog box asks if you are configuring your ProxyServer through
the COM port of your PC or over the LAN (IP).
If you are configuring the ProxyServer over your network, click OK to continue.
If you need to configure your ProxyServer through the Command port, follow the
instructions in the dialog box for selecting the COM Port, then click OK to continue.