User guide

18
DSU ProxyServer User Guide
MTPSR2-201
Loading the ProxyServer Software
The following loading procedure does not provide every screen or option in the process of installing
the ProxyServer software. The assumption is that a technical person is doing the installation and that
a thorough knowledge of Windows and the software loading process is understood. Additional
information on the ProxyServer software is provided in Chapter 4 - Proxy Server Software, as well as
in the on-line help system provided with the software.
The ProxyServer Install Software and User Guide are provided on the ProxyServer CD-ROM. The
CD-ROM is auto-detectable and should start automatically when inserted into your CD-ROM drive.
After you have configured your ProxyServer, you can install the User Guide on your hard drive (for
later viewing or printing) by clicking the Install Manuals icon on the Installation CD screen and
selecting MTPSR2-201.
1 Before inserting the ProxyServer CD-ROM into your CD-ROM drive, determine whether
you will configure your ProxyServer over the LAN or directly from a local PC. For
configuring over a network, your PC must first be configured for network communications
(i.e., TCP/IP stack must be installed) and both the PC and the ProxyServer must be on
the same physical LAN segment. If you need to load the TCP/IP stack, refer to Chapter
5, Client Setup.
2 Insert the ProxyServer CD-ROM into the CD-ROM drive on your local PC. The CD-ROM
should start automatically. However, it may take 10 to 20 seconds for the Multi-Tech
Installation CD screen to appear.
If the Multi-Tech Installation CD Screen does not appear automatically, click My
Computer, then right-click the CD-ROM drive icon and click Autorun.
3 When the Multi-Tech Installation CD Screen appears, click the Install Software icon.
4 The ProxyServer Setup welcome screen is displayed.
Press Enter or click Next> to continue.