User guide

106 MTPSR2-201
DSU ProxyServer User Guide
EMC and Safety Directive Compliance
The CE mark is affixed to this Multi-Tech product to confirm compliance with the following European
Community Directives:
Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of Member States relating to
electromagnetic compatibility.
and
Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States relating
to electrical equipment designed for use within certain voltage limits:
each amended by
Council Directive 93/68/EEC of 22 July 1993 on the harmonization of CE marking requirements.
FCC Part 68 Telecom
1. This equipment complies with Part 68 of the Federal Communications Commission (FCC) rules. On the
outside surface of this equipment is a label that contains, among other information, the FCC registration
number. This information must be provided to the telephone company.
2. As indicated below, the suitable jack (Universal Service Order Code connecting arrangement) for this
equipment is shown. If applicable, the facility interface codes (FIC) and service order codes (SOC) are
shown.
3. An FCC-compliant phone cord with modular plug is provided with this equipment. This equipment is
designed to be connected to the phone network or premises wiring using a compatible modular jack which is
Part 68 compliant. See installation instructions for details.
4. If this equipment causes harm to the phone network, the phone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn’t practical, the phone
company will notify the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
5. The phone company may make changes in its facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens, the phone company will provide advance notice in
order for you to make necessary modifications in order to maintain uninterrupted service.
6. If trouble is experienced with this equipment (the model of which is indicated below) please contact Multi-
Tech Systems, Inc., at the address shown below for details of how to have repairs made. If the equipment is
causing harm to the network, the phone company may request that you remove the equipment from the
network until the problem is resolved.
7. No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or its licensees.
Unauthorized repairs void registration and warranty.
8. Manufacturer: Multi-Tech Systems, Inc.
Trade name: ProxyServer
Model Numbers: MTPSR2-201
FCC Registration Number: AU7USA-250603-XD-N
Modular Jack: RJ-45
Service Center in U.S.A.: Multi-Tech Systems Inc.
2205 Woodale Drive
Mounds View, MN 55112
[phone] Fax [phone]