User guide

Chapter 3 – Supported GSM/WCDMA AT Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 98
+CGMM Request Model Identification
Description: Returns the product model identification. This command is identical to AT+GMM.
Syntax:
Command Responses
AT+CGMM MC8790C
OK
+CGMR Request Revision Identification
Description: Displays the revised software version. This command is the same as +GMR.
Syntax:
Command Responses
AT+CGMR <SW release>.<modem> <size> <date> <time>
OK
Values: <SW release> software release
<modem> type of Wireless modem
<size> software size
<date> date (mmddyy) of software generation
<time> hour (hh:mm) of software generation
Examples:
Command Responses
AT+CGMR
Note: Get software version
R70_00gg.WMP100 2009124 012408 21:14
OK
Note : Software release v7.0, generated on January
24, 2008.
+CGPADDR Show PDP Address
Description: This command returns a list of PDP addresses for the specified context identifiers.
Syntax:
Command Responses
Action Command:
AT+CGPADDR[=<cid>[,<cid>[,…]]]
+CGPADDR: <cid>,<PDP_addr>
[+CGPADDR: <cid>,<PDP_addr>[…]]
OK
Test Command:
AT+CGPADDR=?
+CGPADDR: (list of defined <cid>s)
OK
No Read Command
Values: <PDP_address> PDP Address
Identifies the modem in the address space applicable to the PDP.
String type
The address may be static or dynamic. For a static address, it will be the
one set by the +CGDCONT command when the context was defined.
For a dynamic address it will be the one assigned during the last PDP
context activation that used the context definition referred to by <cid>.
<PDP_address> is omitted if none is available.
<cid> PDP Context Identifier
Range: 1-4
Integer type
If no <cid> is specified, the addresses for all defined contexts are returned.
Parameter Storage: None