User guide

Chapter 2 – Modem-Specific Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 30
!SCPROFDEL Erase Profile Information
Syntax: Execution: !SCPROFDEL=<pid>
Response: OK
Purpose: Delete the identified profile. If <pid> is blank, delete all profiles.
Query List: !SCPROFDEL=?<pid>
Purpose: Return usage instructions.
Description: Erase the information for one or all profiles.
Parameters: <pid>: PDP context definition
Valid range: 1–16
!SCWINS Set/Return Profile’s WINS Addresses
Syntax: Execution: !SCWINS=<pid>,<pri_wins>,<sec_wins>
Response: OK
Purpose: Set the primary and secondary WINS addresses for the specified profile.
Query: !SCWINS?<pid>
Response: <pid>, “<pri_wins>”, “<sec_wins>”
OK
Purpose: Return the primary and secondary WINS addresses for the specified profile.
Description: Set or return a profile’s primary and secondary WINS (Windows Internet Name Services)
addresses.
Parameters: <pid>: PDP context definition
Valid range: 1–16
<pri_wins>: Primary IP address used for WINS
Overrides WINS address received over the air during PDP context activation.
Dot format IP address (for example, 10.10.10.1)
<sec_wins>: Secondary IP address used for WINS
Overrides WINS address received over the air during PDP context activation.
Dot format IP address (for example, 10.10.10.2)
!SDNOTINSTALLED Return SD Installation Status
Syntax: Query: AT!SDNOTINSTALLED?
Response: OK (An SD card is not installed)
or ERROR (An SD card is installed)
Purpose: Indicate if SD card is installed.
Description: Indicate if an SD card is in the modem.