User guide

Chapter 3 – Supported GSM/WCDMA AT Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 114
Examples:
Command Responses
AT+COLP=1
Note: Activate COLP
OK
AT+COLP?
Note: Ask for current functionality
+COLP:1,1
OK
Note: COLP is enabled and provisioned
ATD146290800;
Note: Outgoing call
+COLP:”0146290800”,129,,”JOE”
or
+COLP:“0146290800”,129,1,,”8000204212FFFF”
OK
Note: ”8000204212FFFF”: UCS2 format
Connected outgoing line number and name presentation
AT+COLP=? +COLP: (0-1)
OK
+COPN Read Operator Name
Description: This command returns the list of all store operator names (in numeric and alphanumeric
format).
Syntax:
Command Responses
Action Command:
AT+COPN
+COPN: <NumOper>,<AlphaOper>
[+COPN: <NumOper>,<AlphaOper> […] ]
OK
Test Command: AT+COPN=? OK
No Read Command
Values: <NumOper> Operator in Numeric Format
<AlphaOper> Operator in long alphanumeric format (see Operator Names in the
Appendix)
Parameter Storage: None
Examples:
Command Responses
AT+COPN
Note: Ask for list of all networks
+COPN: 20201 "GR COSMOTE"
+COPN: 20205 "Vodafone GR"
+COPN: 20209 "GR Q-TELECOM"
+COPN: 20210 "TIM GR"
…
OK
AT+COPN=? OK
+COPS Operator Selection
Description: There are three possible ways of selecting a Public Land Mobile Network (PLMN) operator:
• The product is in manual mode. It then tries to find the operator specified by the
application and, if found, tries to register.
• The product is in automatic mode. It then tries to find the home operator and, if
found, tries to register. If not found, the product automatically searches for another
network.