Specifications

MultiConnect AW Analog-to-Wireless Converter
8 Multi-Tech Systems, Inc. Quick Start Guide
2. Configure options B thru D for your GPRS cellular network.
GPRS Network Dependent
Option
Default
Description
B) Protocol
TCPClient
Select either TCPClient, Telnet,
UDP, or Pass Thru.
C) Inbound or
Outbound
Outbound
only
Outbound only. No other
selection.
D) Wireless
Connection
On Demand
Select either On Demand or
Always On.
ATTN: If Always On is desired,
wait until you have made all your
other configuration changes
before selecting this option.
3. Options F and G are dependent on your local/remote port.
Port Dependent
Option
Default
Description
F) Remote Port
1
The TCP/IP port that the remote
device is listening on.
G) Remote IP
None
The IP address of the remote device
on the network you are going to.
4. The Wireless Band is set depending on the region of the world the
unit is set up for, e.g., 850/1900MHz for NAM.
Wireless Band
Option
Default
Selection
K) Wireless
Band
Dual-band
850-1900
MHz
This option is default depending on
the region of the world the unit is
being set up for, e.g., 900/1800MHz
for Europe.
0) dual-band 850/1900 MHz
1) dual-band 900/1800 MHz