Specifications

MultiConnect AW Analog-to-Wireless Converter
Multi-Tech Systems, Inc. Quick Start Guide 5
2. Insert the SIM card into the card holder. The above figure illustrates
the correct SIM card orientation.
3. Verify that the SIM card fits properly; then close the door.
Caution: The dial port is not designed to be connected to a
Public Telecommunications Network (PSTN/phone line) or used
outside the building.
1. Connect a suitable antenna to the ANT connector on the back of
the unit.
2. Connect the DE9 connector (9-pin) of the RS232 cable to the
COMMAND connector on the back of the unit and connect the
other end to serial port on your PC.
3. Connect a RJ11 phone cable to the DIAL connector on the back of
the unit and connect the other end of the phone cable to the
customer’ s analog modem.
4. Remove the protective shipping cover. Attach the appropriate input
connector to the power supply module by holding down on the slide
lock and tipping the input connector to fit into the notch on top of
the module and then lowering it into the slide lock. Then release the
slide lock.