Specifications

MultiConnect AW Analog-to-Wireless Converter
4 Multi-Tech Systems, Inc. Quick Start Guide
this static build up, proper precautions should be taken to avoid
exposure to electrostatic discharge during handling and mounting.
1B3B4B
● 1 MultiConnect Converter
● 1 antenna
● 1 RS232 cable
● 1 power supply
● 1 Quick Start Guide
Notes:
● If you are mounting the unit to a flat surface, you must supply
mounting screws.
● If required, your wireless provider will supply the SIM card.
Please refer to Multi-Tech’s Cellular Activation Web site at
http://www.multitech.com/activation.go for information on activating
your cellular modem. On the Cellular Activation Web site, click on the
down arrow in Select Your Product and select MT200A2W from the pull
down listing.
The MultiConnect requires the power supply connection to begin
operation. It also requires a SIM card (Subscriber Identity Module) to
operate on a GPRS/GSM network. To install the SIM, do the following:
1. Open the SIM door by pressing down on the top of the door and
prying open the door.
Note: When changing a SIM, ensure that power is removed from
the unit.