Specifications

Chapter5–FirmwareUpgrade
40 MultiConnectAWUserGuide
3.
Closetheterminalprogram.
4. Double‐clicktheFlashWizardiconorfilenametorunFlashWizard.TheIdentifyingDeviceswindowdisplaysas
theFlashWizardlocatesandidentifiesthedevicesconnectedtoyoursystem.
Note: IfthemessageERROR:Novaliddevicesdetecteddisplays,verifythattheMultiConnectisturnedon,
thatallcablesarecorrectlyandsecurelyattached,an
dthecorrectCOMportisbeingused.

5.
ClicktohighlightthemodelandclickNext.
6. ClicktheporttobeupgradedfromthePortlistandclickNext.
TheProgressdialogboxappears,showingastatusbarthatindicatestheprogr essoftheupgrade.

Caution: DisruptingtheFlashWizardduringthisstageoftheupgrademaymakeyourunitinoperable.