Specifications

Chapter3–ConfiguringPorts

MultiConnectAWUserGuide 25

CDMACellularPortConfiguration

1. Enter1forCellularPort.CDMAisthedefaultfortheMT200A2W‐C1,sotheCDMACellularPortmenu

displays.

SettheportoptionsasdescribedinCDMAPortOptions.

3. Saveyourconfigurationbyenteringa+attheprompt.ReturntotheMainMenuandwaitforthecellular

wirelessnetworkandtheanalogmodemtochangetoaREADYstate.TheCurrentSettingswillchangeto:

(WIRELESS_READY)(ANALOG_READY).

CDMAPortOptions

CDMAnetworkDependent

Option Default Selection

B)Protocol TCPClient SelecteitherTCPClient,Telnet, UDP,orPassThru

PortDependent

Option Default Description

Note:Theseoptionsdependonyourlocal/remoteport.

F)RemotePort 1 TheTCP/IPportthattheremotedeviceislistening on.

G)RemoteIP None

TheIPaddressoftheremotedeviceonthenetworkyouare

goingto.