User guide

Chapter 1 – Product Description and Specifications
Multi-Tech Systems, Inc. MultiConnect AW User Guide 5 
Safety
Dial Port Caution
The dial port is not designed to be connected to a Public Telecommunications Network (PSTN/phone line) or used
outside the building.
General Safety
The modem is designed for and intended to be used in fixed and mobile applications. “Fixed” means that the device
is physically secured at one location and is not able to be easily moved to another location. “Mobile” means that the
device is designed to be used in other than fixed locations.
Caution: Maintain a separation distance of at least 20 cm (8 inches) is normally maintained
between the transmitter’s antenna and the body of the user or nearby persons. The Modem
is not designed for or intended to be used in portable applications within 20 cm. (8 inches) of
the body of the user.
RF Interference Issues
It is important to follow any special regulations regarding the use of radio equipment due in particular to the possibility
of radio frequency, RF, interference. Please follow the safety advice given below carefully.
• Switch OFF your MultiConnect when in an aircraft. The use of cellular telephones in an aircraft may endanger
the operation of the aircraft, disrupt the cellular network and is illegal. Failure to observe this instruction may
lead to suspension or denial of cellular telephone services to the offender, or legal action or both.
• Switch OFF your MultiConnect when around gasoline or diesel-fuel pumps and before filling your vehicle with
fuel.
• Switch OFF your MultiConnect in hospitals and any other place where medical equipment may be in use.
• Respect restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations
are in progress.
• There may be a hazard associated with the operation of your MultiConnect close to inadequately protected
personal medical devices such as hearing aids and pacemakers. Consult the manufacturers of the medical
device to determine if it is adequately protected.
• Operation of your MultiConnect close to other electronic equipment may also cause interference if the
equipment is inadequately protected. Observe any warning signs and manufacturers’ recommendations.
Maintenance of the Wireless MultiConnect
Your wireless MultiConnect is the product of advanced engineering, design, and craftsmanship and should be treated
with care. The suggestions below will help you to enjoy this product for many years.
● Do not expose the MultiConnect to any extreme environment where the temperature or humidity is high.
● Do not attempt to disassemble the MultiConnect. There are no user serviceable parts inside.
● Do not expose the MultiConnect to water, rain, or spilled beverages. It is not waterproof.
● Do not abuse your MultiConnect by dropping, knocking, or violently shaking it. Rough handling can damage it.
● Do not place the MultiConnect alongside computer discs, credit or travel cards, or other magnetic media. The
information contained on discs or cards may be affected by the phone.
● The use of accessories not authorized by Multi-Tech or not compliant with Multi-Tech’s accessory
specifications may invalidate the warranty of the MultiConnect.
● In the unlikely event of a fault in the MultiConnect, contact Multi-Tech Technical Support.
Handling Precautions
All devices must be handled with certain precautions to avoid damage due to the accumulation of static charge.
Although input protection circuitry has been incorporated into the devices to minimize the effect of this static build up,
proper precautions should be taken to avoid exposure to electrostatic discharge during handling and mounting.