User guide

Chapter 4 – Device Configuration
Multi-Tech Systems, Inc. MultiConnect AW User Guide 25 
CDMA Cellular Port Configuration
Port Dependent
Option Default Description
E) Local Port
23
Local Port is the port that the MultiConnect AW
listens on for inbound traffic.
F) Remote Port
0
Remote Port is the IP port that the remote device
listens on. When you change the Remote Port, it
becomes the new default port.
G) Remote IP
none
Remote IP is the IP address of the device you are
connecting to for outbound. When you change the
Remote IP, it becomes the new default IP.
Phone Number/IP Conversion Table
Option Default Selection
J) View or change
Phone Number/IP
Conversion Table
This option allows for additional connections to be
added to the Phone Number/ IP Conversion Table.
When a dialed number matches one of those in this
table, the default Remote Port and IP options are
overridden during the call. If the entry does not
match, the default is used. For detail instructions on
entering data in this table, refer to View or Change
Phone Number/IP Conversion Table in this chapter.
MultiConnect AW Security
Option Default Selection
Z) Enter Wireless
Modem Command
Mode
This option opens the command port on the wireless
modem to enter AT commands.