User guide

Chapter 3 – Configuration of your MultiConnect
4. The Wireless Band is set depending on the region of the world the unit is set up for, e.g., 850/1900MHz for
NAM.
Wireless Band
Option Default Selection
K) Wireless Band This option is default depending on the region of the
world the unit is set up for, e.g., 900/1800MHz for
Europe.
0) dual-band 850/1900 MHz
1) dual-band 900/1800 MHz
5. Configure options L thru N dependent on your Access Point Name (APN) Server requirements.
APN Dependent
Option Default Selection
L) APN User Name The user name may not be required by all network
providers.
M) APN Password The password may not be required by all network
providers.
N) APN Server
The APN assigned by your cellular network provider.
6. Save your configuration by pressing the + key. Then return to the Main Device Configuration menu and wait
for the cellular wireless network and the analog modem to change to a READY state. The Current Settings
will change to: (State WIRELESS_READY) (State ANALOG_READY).
Initial configuration of the GPRS version is complete.
GSM Cellular Network Configuration
1. The GSM Cellular Port menu is displayed.
2. Configure options A thru D for your GSM cellular network.
GSM network Dependent
Option Default Selection
A) GPRS or GSM
GPRS Select GSM
B) Protocol
PassThru No selection
K) Wireless Band This option is default depending on the region of the world
the unit is set up for, e.g., 850/1900MHz for NAM.
0) dual-band 850/1900 MHz
1) dual-band 900/1800 MHz
Multi-Tech Systems, Inc. MultiConnect AW User Guide 17 
3. You need to save your configuration by pressing the + key. Then return to the Main Device Configuration
menu and wait for the cellular wireless network and the analog modem to change to a READY state. The
Current Settings will change to: (State WIRELESS_READY) (State ANALOG_READY).
Initial configuration of the GSM version is complete.