User guide

Chapter 3 – Configuration of your MultiConnect
2. What would you like this port to do? Screen is displayed.
Enter Selection => _ Enter A and press OK
Device Configuration
Initial configuration of the MultiConnect AW could involve just the Cellular Port menu which is dependent on cellular
network that you are connecting to. The Device Configuration main menu changes depending on the cellular network.
The cellular network change is in Option 1 which in the Current Settings displays the cellular network type; GPRS or
GSM for the MT100A2W-G unit or CDMA for the MT100A2W unit. The GPRS cellular network is for packet switched
data. GSM uses circuit switch data.
The Analog (PSTN) Port menu is defaulted to a typical configuration. The System Login option thru the System
Reboot options refine the use of your MultiConnect AW.
1. The Device Configuration main menu is displayed.
Multi-Tech Systems, Inc. MultiConnect AW User Guide 15

In the Enter option to modify => _ Enter 1 and press OK for both versions. The Cellular Port configuration
menu is displayed.