User guide

52 Multi-Tech Systems, Inc. MultiConnect AW User Guide
Appendix C – Environmental
Information
Restriction of the Use of Hazardous Substances (RoHS)
Multi-Tech Systems, Inc.
Certificate of Compliance
2002/95/EC
Multi-Tech Systems, Inc. confirms that this product now complies with the chemical concentration
limitations set forth in the directive 2002/95/EC of the European Parliament (Restriction Of the use of
certain Hazardous Substances in electrical and electronic equipment - RoHS)
These Multi-Tech Systems, Inc. products do not contain the following banned chemicals:
● Lead, [Pb] < 1000 PPM
● Mercury, [Hg] < 1000 PPM
● Hexavalent Chromium, [Cr+6] < 1000 PPM
● Cadmium, [Cd] < 100 PPM
● Polybrominated Biphenyl, [PBB] < 1000 PPM
● Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM
● Moisture Sensitivity Level (MSL) =1
● Maximum Soldering temperature = 260C (wave only)
Notes:
● Lead usage in some components is exempted by the following RoHS annex; therefore, higher lead
concentration could be found.
● Lead in high melting temperature type solders (i.e., tin-lead solder alloys containing more than 85%
lead).
● Lead in electronic ceramic parts (e.g., piezoelectronic devices).
● Moisture Sensitivity Level (MSL) – Analysis is based on the components/material used on the board.