User guide

Chapter 5 – Firmware Upgrade
36 Multi-Tech Systems, Inc. MultiConnect AW User Guide
3.
Close HyperTerminal.
4. Double-click the Flash Wizard icon or filename to run Flash Wizard. The Identifying Devices window
displays as the Flash Wizard locates and identifies the devices connected to your system.
Note: If the message ERROR: No valid devices detected displays, verify that the MultiConnect is
turned on, that all cables are correctly and securely attached, and the correct COM port is
being used.
5.
Click to highlight model and click Next.
6. Click the port to be upgraded from the Port list and click Next.
The Progress dialog box appears, showing a status bar that indicates the progress of the upgrade.