User guide

Chapter 4 – Device Configuration
32 Multi-Tech Systems, Inc. MultiConnect AW User Guide
Option Default Selection
A) Menu Inactivity Timer 30 (sec)
This is a time limit on how long a menu will display with no
activity. Time is displayed in seconds. Zero seconds disables the
timer.
B) No Signal Reset Timer
*
300 (sec)
The MultiConnect resets itself if it cannot find a signal strong
enough to establish a wireless connection. Time is displayed in
seconds. Zero seconds disables timer.
* MT100A2W-G only.
Setup Email
The email function sends the network assigned public IP address and the user assigned local port
number to the recipient’s email address. This email is used for inbound only. The IP address and port
number are displayed in “My Public ID” after the last option in the Cellular Settings menu and above @)
Main Menu.
Option Default Selection
A) SMTP UN This is the email server’s username.
B) SMTP PW This is the email server’s password.
C) SMTP PORT This is the port that the email server listens on. The default port number is 25.
D) SMTP Authentication
If your email account requires authentication, the MultiConnect will send the
username and password to the mail server. The default is to have
authentication enabled.
E) SMTP Server This is the mail server’s IP address/name.
F) Domain This is the mail server’s domain.
G) Sender’s Name This shows who sent the email.
H) Sender’s Address This shows where the email came from.
I) Recipient’s Address
This is the IP address where the email is being sent. If there is no recipient
address, the email service is disabled.