User guide

Chapter 4 – Device Configuration
28 Multi-Tech Systems, Inc. MultiConnect AW User Guide
CDMA Cellular Port Configuration
When an external Multi-Tech CDMA modem is connected to the MODEM port of a MT100A2W unit and
the unit is powered up, the Device Configuration menus default to a CDMA Cellular Network.
Network Dependent
Option Default Description
A) CDMA
CDMA
(External)
No selection, CDMA is the default for your configuration.
B) Protocol TCPClient
1) TCPClient is an internet protocol intended to get data from one
network device to another.
2) Telnet is a client communication.
3) UDP is a connectionless protocol in that UDP makes no
provision for acknowledgement of packets received.
4) PassThru is not supported by the CDMA version.
C) Inbound/Outbound Outbound
0) Auto Detect automatically detects between inbound and
outbound.
1) PPP Client (Outbound) is for outbound traffic from the
MultiConnect AW to the wireless network.
2) PPP Client Inbound (Listening) is for inbound traffic to the
MultiConnect AW
D) Wireless Connection OnDemand
1) On-Demand initiates the wireless connection when a request
made.
2) Always On is always connected to the cellular network.
ATTENTION: If Always On is desired, wait until you have made all
your other configuration changes before selecting this setting.
Port Dependent
Option Default Description
E) Local Port 23
Local Port is the port that the MultiConnect listens on for inbound
traffic.
F) Remote Port 0
Remote Port is the IP port that the remote device listens on. If you
change the Remote Port, it becomes the new default port.