User guide

Chapter 4 – Device Configuration
Multi-Tech Systems, Inc. MultiConnect AW User Guide 23
When you select a numbered option from the Device Configuration menu, the window shows a sub-
menu of parameters that you can change for that option. To change settings for a parameter, type its
corresponding letter and press ENTER. This chapter includes details on the settings for each parameter.
The table below lists the sub-menus for each option.
1) Cellular Port
GPRS Cellular Port * GSM Cellular Port * CDMA Cellular Port **
A) GPRS
B) Protocol
C) Inbound/Outbound
D) Wireless Connection
E) Local Port
F) Remote Port
G) Remote IP
J) View or change Phone
Number/IP Conversion Table
K) Wireless Band
L) APN Username
M) APN Password
N) APN Server
O) Phy TimeOut (Min)
P) DLE Mode
Q) TCP TxDelay
R) HandShake
S) SIM Pin Code TimeOut (sec)
Z) Enter Wireless Modem
Command Mode
A) GSM
B) Protocol
K) Wireless Band
R) HandShake TimeOut (sec)
S) SIM Pin Code
Z) Enter Wireless Modem
Command Mode
A) CDMA
B) Protocol
C) Inbound/Outbound
D) Wireless Connection
E) Local Port
F) Remote Port
G) Remote IP
J) View or change Phone Number/IP
Conversion Table
Z) Enter Wireless Modem Command
Mode
2) Analog (PSTN) Port 3) System Login 4) Timers
A) Modem Initialization String
B) Modem Settings
A) No Login
B) Login Required
C) Change Password
A) Menu Inactivity Timer
B) No Signal Reset Timer (Not
applicable to CDMA)
5) Set Email
6) Reset Parameters to
Default
7)System Reboot
A) SMTP UN
B) SMTP PW
C) SMTP PORT
D) SMTP Authentication
E) SMTP Server
F) Domain
G) Sender’s Name
H) Sender’s Address
I) Recipient’s Address
Are you sure you want to
reset ALL parameters back to
Defaults?
yes/no
Are you sure you want to reboot the
unit?
Yes/no
* MT100A2W-G only.
** MT100A2W only.