User guide

Chapter 3 – Initial MultiConnect Configuration
20 Multi-Tech Systems, Inc. MultiConnect AW User Guide
2. Type + next to Enter option to modify => and press ENTER to save your configuration.
3. Return to the Device Configuration menu and wait for the cellular wireless network and the analog
modem to change to a READY state. The Current Settings will change to: (WIRELESS_READY)
(ANALOG_READY).
This completes the initial GSM configuration.
CDMA Cellular Network Configuration
When an external Multi-Tech CDMA modem is connected to the MODEM port of a MT100A2W unit and
the unit is powered up, the Device Configuration menus default to a CDMA Cellular Network.
1.
Configure options A thru D depending on your CDMA cellular network.
CDMA Network Dependent
Option Default Description
A) CDMA CDMA Leave the default.
B) Protocol TCPClient Select TCPClient, Telnet, UDP, or PassThru
C) Inbound or
Outbound
Outbound Select one of the following:
0) Auto Detect which automatically detects between inbound and
outbound,
1) PPP Client (Outbound),
2) PPP Client (Listening) for inbound.
D) Wireless
Connection
OnDemand Select either OnDemand or Always On
ATTENTION: If you want Always On, make other configuration
changes before selecting this option.
2. Set the port options. When you change the Remote Port or Remote IP, they become the new default
without pressing the + key to save the configuration.
Port Dependent
Option Default Description
E) Local Port 23 The Local Port is for inbound communications
F) Remote Port 0 TCP/IP port that remote device is listening on.
G) Remote IP None IP address of remote device on the network you are connecting to.
3. Type + next to Enter option to modify => and press ENTER to save your configuration.