User guide

Chapter 3 – Initial MultiConnect Configuration
Multi-Tech Systems, Inc. MultiConnect AW User Guide 19
3. Set the Wireless Band based on the region of the world.
Wireless Band
Option Default Selection
K) Wireless Band ---
Select an option based on the region you are setting up the
unit for.
0) dual-band 850/1900 MHz (for North America)
1) dual-band 900/1800 MHz (for Europe)
4. Configure options L thru N based on your Access Point Name (APN) Server requirements.
APN Dependent
Option Default Selection
L) APN User Name --
The user name may not be required by all network
providers.
M) APN Password -- The password may not be required by all network providers.
N) APN Server -- The APN assigned by your cellular network provider.
5. Type + next to Enter option to modify => and press ENTER to save your configuration.
6. Return to the Device Configuration menu and wait for the cellular wireless network and the analog
modem to change to a READY state. The Current Settings will change to: (WIRELESS_READY)
(ANALOG_READY).
This completes the initial GPRS configuration.
GSM Cellular Network Configuration
The GSM Cellular Port menu appears when GSM has been selected.
1.
Configure options A, B and K for your GSM cellular network.
GSM network Dependent
Option Default Selection
A) GPRS or GSM GPRS Select GSM.
B) Protocol PassThru Leave the default value.
K) Wireless Band Select an option based on the region you are setting up the unit for.
0) dual-band 850/1900 MHz (for North America)
1) dual-band 900/1800 MHz (for Europe)