User guide

Chapter 3 – Initial MultiConnect Configuration
18 Multi-Tech Systems, Inc. MultiConnect AW User Guide
GPRS Cellular Network Configuration
The GPRS Cellular Port menu appears.
1.
Configure options A thru D for your GPRS cellular network.
GPRS Network Dependent
Option Default Description
A) GPRS or GSM GPRS Leave the default.
B) Protocol TCPClient Select TCPClient, Telnet, UDP, or PassThru.
C) Inbound or Outbound Outbound Select one of the following:
0) Auto Detect which automatically detects between
inbound and outbound,
1) PPP Client (Outbound),
2) PPP Client (Listening) for inbound.
D) Wireless Connection OnDemand Select either OnDemand or Always On.
ATTENTION: If you want Always On, make other
configuration changes before selecting this option.
2. Set the port options. When you change the Remote Port or Remote IP, they become the new default
without pressing the + key to save the configuration.
Port Dependent
Option Default Description
E) Local Port 23 The Local Port is for inbound communications
F) Remote Port 0 TCP/IP port that remote device is listening on.
G) Remote IP None
IP address of remote device on the network you are
connecting to.