User guide

Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem rCell User Guide 43
Local LAN Internal subnet of the local security gateway for which the security services
should be provided. If the router acts as a host, this should be configured as
None.
Remote Gateway IP Interface where the IPSec tunnel ends. In the case of a Road Warrior with a
Dynamic IP address, this should be configured to ANY.
FQDN FQDN is a Fully Qualified Domain Name that resolves to the Local Wan IP of
the router or in the case of GRE/IPSEC, it is used to identify the Wan IP of
the remote location. This is provided by your ISP or created by you if you are
using a Dynamic DNS service. When FQDN is selected, the Remote
Gateway IP should be left blank.
Remote LAN Internal subnet of the remote security gateway for which the security
services should be provided. If the remote end is the host, this should be
configured as None.
UID (Unique Identifier String) Check the UID box to enable the Local ID and Remote ID. Local ID and
Remote ID are active only when UID is enabled.
Local ID
Enter a string identifier for the local security gateway.
Remote ID
Enter a string identifier for the remote security gateway.
NetBIOS Broadcast Check this option to enable broadcasts over the connection. It will allow
computers on the network to share Microsoft file and printer sharing
information.
103B113BSave Button
Click the Save button to save these settings.