User guide

Multi-Tech Systems, Inc. MultiModem rCell User Guide 6

Chapter 1 – Introduction and Description

Introduction

This guide describes the MultiModem® rCell intelligent wireless routers with an Ethernet II interface. The

MultiModem rCell Router is configured for one of three connectivity modes: always-on, wake-up on ring, or dial-

on demand. The always-on network connection automatically establishes a wireless data connection and allows

for around the clock surveillance, monitoring or real time data acquisition of any remote Ethernet device such as a

Web camera. If the data link is dropped in the event of poor reception or a complete loss of service, it

automatically re-establishes the data link. The wake-up on ring configuration allows the router to “wake up” and

initiate a connection when it detects an incoming ring. For security reasons, you can setup the router to wake up

based on a particular caller ID number. This configuration is ideal for reducing the costs associated with the

modem being online and available 24/7. When configured for dial-on demand, the router only accesses the

Internet when data is present. This configuration is ideal for sharing Internet access among networked PCs.

Model

Description

MTCBA-H3-EN3-P1

Quad-band HSPA 7.2

Package Contents

Unbundled package without accessories

Bundled package with accessories

1 router

1 Quick Start Guide

Note: You must supply mounting screws,

AC or DC power supply, and an

antenna.

1 router

1 antenna

1 Ethernet cable

1 power supply

1 Quick Start Guide

Note: You must supply mounting screws.

Note: If required, your wireless provider supplies the SIM card.