User guide

Chapter 2 – Installation
17 Multi-Tech Systems, Inc. MultiModem rCell User Guide
The Local Area Connection Properties dialog box displays.
3. Select Internet Protocol [TCP/IP] and click Properties. The Internet Protocol (TCP/IP) Properties screen
displays.
Note: If the Internet Protocol (TCP/IP) Properties shows your current IP configuration, record this information.
You may want to restore the computer’s settings after configuring the router.
4. Enter TCP/IP Properties for a Fixed IP Address. Repeat these steps for each computer on your network
a. Select Use the following IP address.
b. Enter the computer’s IP Address. Example: 192.168.2.x.
Note: The x in the address stands for numbers 101 and up.
c. Enter the Subnet Mask. Example: 255.255.255.0
d. Enter the Default Gateway. Example: 192.168.2.1