User guide

MultiModem Wireless Modem with Ethernet Interface
12 Multi-Tech Systems, Inc. Quick Start Guide
The Setup Wizard Screen
The following is a screen shot of the Setup Wizard. Using this
screen saves you time so that you are not entering the same
information several screens; the data entered here defaults to the
other screens.
IP Configuration
IP Address – The default is 192.168.2.1. To change it, simply
enter your own IP address.
Mask – The default is 255.255.255.0
DNS – Enter the primary DNS IP address for the system.
The default is 0.0.0.0
PPP Configuration
PPP – The default is Enable. This allows the PPP dialer to
operate.
Dial-on-Demand – The default is Enable. This allows the
dial-on-demand feature to operate. When Disabled, the
modem always stays connected.