Specifications

Chapter 13 – Specific AT Commands
Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 82
Change Default Melody +WCDM
Description: This specific command allows a manufacturer specific melody to be selected. This melody will be played for
any incoming voice call, either on the buzzer or on the speaker.
Note: Selection of the player will have an effect on the setting of the WCDP command.
Values: <melody>
0…10 Desired melody (Default is 0)
<player>
0 Play specified melody on the buzzer for any incoming voice call. (default)
1 Play specified melody on the speaker for any incoming voice call.
Syntax: Command syntax: AT+WCDM=<melody>,<player>
Command Possible Responses
AT+WCDM=0
Note: Select no melody
OK
AT+WCDM=5
Note: Select melody n°5
OK
AT+WCDM?
Note: Indicate the current melody
+WCDM: 5,0
OK
Note: Melody n°5 is currently selected, and the
buzzer is selected to play it.
RING
Note: An incoming call occurs, and the melody
n°5 is played on the buzzer.
AT+WCDM=,1
Note: Select the speaker to play the
melody on.
OK
AT+WCDM? +WCDM: 5,1
OK
Note: Now the speaker is selected to play the
melody if an incoming call occurs.
Software Version +WSSW
Description: This command displays the internal software version.
Syntax: Command syntax: AT+WSSW
Command Possible Responses
AT+WSSW
Note: Get Software version
+WSSW: WQ1.6
OK
Note: internal software information