Specifications

Chapter 5 – Network Service Commands

Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 32

Change NAM Selection +WNAM

Description: This command is used to request a change in the NAM (Number Assignment Modem) selection. The

modem supports up to 4 NAMs. However, if a NAM is not fully programmed, the modem will not switch to

the requested NAM. The default NAM for the modem is 1. The response to this command is only OK, and is

no guarantee that the NAM will change. If the NAM selection request is accepted, the unsolicited command

+WNAM: <nam> will be returned. If or when the actual NAM changes, the unsolicited command +WCNM:

<nam> will be returned. See Unsolicited Result Codes in Chapter 21.

Values: <nam>

1 NAM 1

2 NAM 2

3 NAM 3

4 NAM 4

5 Auto NAM

Syntax: Command syntax: AT+WNAM=<nam>

Command Possible Responses

AT+WNAM=2

Note: Use NAM 2, if programmed

+WNAM: 2

+WCNM: 2

AT+WNAM=3

Note: Use NAM 3, if programmed

Note: No unsolicited response indicates that NAM 3 is

not valid, thus no change in NAM.

AT+WNAM=5

Note: Try Auto NAM

+WNAM: 5

+WCNM: 1

Note: Auto NAM is selected, NAM 1 chosen.

AT+WNAM? +WNAM: 1

AT+WNAM=? +WNAM: (1-5)

Read Current NAM +WCNM

Description: This command is used to read the current NAM (Number Assignment Modem). The modem supports up to 4

NAMs. Also, note that there exists an unsolicited response +WCNM: <nam> that is returned any time the

NAM changes. See Unsolicited Result Codes in Chapter 21.

Syntax: Command syntax: AT+WCNM

Command Possible Responses

AT+WCNM

Note: Ask for the current NAM

+WCNM: 1

Note: NAM 1 in use