Specifications

Chapter 5 – Network Service Commands
Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 30
Syntax: Command syntax: AT+COPS=<mode>,<term>
Command Possible Responses
AT+COPS?
Note: Ask for current Mode
Preference
+COPS: 0,0
OK
Note: Automatic mode, use PRL order, Permanent
AT+COPS=? +COPS: (0-3),(0-1)
OK
Note: Modes: Automatic, CDMA Only, CDMA or AMPS
only; Term: Permanent, Power Cycle.
AT+COPS=0,0
Note: Ask for Automatic mode
OK
+COPS: 0,0
Note: Unsolicited +COPS result confirms Automatic
mode, Permanent term is requested.
AT+COPS=1,1
Note: Ask for CDMA Only mode
OK
+COPS: 1,1
Note: Unsolicited +COPS result confirms CDMA Only
mode, Power Cycle term is requested.
AT+COPS=2,0
Note: Ask for CDMA or AMPS only
mode
OK
+COPS: 2,0
Note: Unsolicited +COPS result confirms CDMA or
AMPS only mode, Permanent term is requested.
AT+COPS=3,0
Note: Ask for Analog only mode
OK
+COPS: 3,0
Note: Unsolicited +COPS result confirms Analog only
mode, Permanent term is requested.
Band Preference +WBND
Description: The Band Preference of a CDMA modem governs the basic system acquisition behavior of the MS in
conjunction with the mode preference (+COPS) and the PRL (Preferring Roaming List). It’s important to note
that the PRL takes precedence over band preference when guiding the phone to a band. The PRL must
allow a particular band first, before the band preference can take effect. In other words, a band preference
change is simply a request; the PRL decides whether or not to allow it. If the setting is accepted by the MS,
the value will be written to non-volatile RAM and persist after a power-cycle.
Note 1: This command is not available in Sprint® and Verizon software versions.
Note 2: <band> 1 (PCS) is not available in RUIM software versions.
Values: The parameter values are the following ones:
<band>
0 Any
1 PCS
2 Cellular A or B
3 Cellular A
4 Cellular B
Syntax: Command syntax: AT+WBND=<band>
Command Possible Responses
AT+WBND?
Note: Ask for current Band Preference
+WBND: 0
OK
Note: Any
AT+WBND=? +WBND: (0-4)
OK
Note: Any, PCS, Cell, Cell A, Cell B
AT+WBND=0
Note: Allow Any Band
OK