Specifications

Chapter 20 – Unsolicited AT Result Codes
Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 167
gpsOne Session Prompt +WPUST
Description: This unsolicited response is used to indicate that user input is required for a network initiated gpsOne
session. This response is output when the AT+WPDCT specified value is 2 (prompt). User input must be
entered with 20 seconds of this response output. If user input is not received, the network initiated gpsOne
session is refused.
Syntax: Response Syntax: +WPUST: <message>
Example Result
+WPUST: GPS User Consent Required
Note: User input requested to accept/reject network initiated gpsOne session.
+WPUST: GPS User Consent Timed Out
Note: No user input within 20 seconds. gpsOne session rejected.
Download PRL Status +DPRL
Description: This response is used to report the validation status of a downloaded PRL. Validation of the downloaded
PRL data is performed when the +WCMT=1 command is issued to save the PRL to NV Ram. See the
‘Download PRL’ command (+DPRL) in section 16 for additional information about the process used to
download and activate a PRL using the AT command interface.
Syntax: Response Syntax: +DPRL: <status>
Example Result
+DPRL: 0
Note: Downloaded PRL validation successful.
<status>
0 Validation successful
1 Validation unsuccessful