Specifications

Chapter 17 – Qualcomm Defined AT Commands for CDMA Operation
Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 124
Dump TCP Protocol Statistics $QCTCPD
Description: This command is used to dump the TCP statistics in ASCII format to the DTE.
Syntax: Command syntax: AT$QCTCPD
Command Possible Responses
AT$QCTCPD?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCTCPD
Note: Dump TCP statistics information
$QCTCPD:
ActiveOpens :0000 PassiveOpens
:0000
….
OK Note: Command is valid
Reset TCP Protocol Statistics $QCTCPR
Description: This command is used to zero all of the TCP statistics counters.
Syntax: Command syntax: AT$QCTCPR
Command Possible Responses
AT$QCTCPR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCTCPR
Note: Reset TCP statistics counter
$QCTCPR:
OK Note: Command is valid
Set Data Service Option $QCSO
Description: This command is used to Set Data Service Option number set; saves to non-volatile memory.
Values: <Val>
0 pre-707 SO numbers (RS 1: Async 4, packet 7; RS 2: Async 12, packet 15)
1 proprietary SO numbers (RS 1: Async 4, packet 7; RS 2: Async 0x8021, packet 0x8020)
2 IS-707 SO numbers (RS 1: Async 0x1004, packet 0x1007; RS 2: Async 12, packet 15)
Syntax: Command syntax: AT$QCSO =<Val>
Command Possible Responses
AT$QCSO?
Note: Display the current setting
$QCSO: 2
OK Note: Command is valid
AT$QCSO =?
Note: Display the range of values
$QCSO: (0-2)
OK Note: Command is valid
AT$QCSO =1
Note: Set proprietary SO numbers.
OK
Note: Command is valid
Clear Mobile Error Log $QCCLR
Description: This command is used to clear the mobile error log.
Syntax: Command syntax: AT$QCCLR
Command Possible Responses
AT$QCCLR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCCLR
Note: Clear the mobile error log
$QCCLR:
OK Note: Command is valid