Specifications

Chapter 17 – Qualcomm Defined AT Commands for CDMA Operation
Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 123
Reset PPP Protocol Statistics $QCPPPR
Description: This command is used to zero all of the PPP statistics counters.
Syntax: Command syntax: AT$QCPPPR
Command Possible Responses
AT$QCPPPR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCPPPR
Note: Reset PPP statistics counter
$QCPPPR:
OK Note: Command is valid
Dump IP Protocol Statistics $QCIPD
Description: This command is used to dump the IP statistics in ASCII format to the DTE.
Syntax: Command syntax: AT$QCIPD
Command Possible responses
AT$QCIPD?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCIPD
Note: Dump IP statistics information
$QCIPD:
IP:
InReceives :0000 InHdrErrors :0000
….
OK Note: Command is valid
Reset IP Protocol Statistics $QCIPR
Description: This command is used to zero all of the IP statistics counters.
Syntax: Command syntax: AT$QCIPR
Command Possible Responses
AT$QCIPR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCIPR
Note: Reset IP statistics counter
$QCIPR:
OK Note: Command is valid
Dump UDP Protocol Statistics $QCUDPD
Description: This command is used to dump the UDP statistics in ASCII format to the DTE.
Syntax: Command syntax: AT$QCUDPD
Command Possible Responses
AT$QCUDPD?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCUDPD
Note: Dump UDP statistics information
$QCUDPD:
InDatagrams :0000 OutDatagrams :0000
….
OK Note: Command is valid
Reset UDP Protocol Statistics $QCUDPR
Description: This command is used to zero all of the UDP statistics counters.
Syntax: Command syntax: AT$QCUDPR
Command Possible Responses
AT$QCUDPR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCUDPR
Note: Reset UDP statistics counter
$QCUDPR:
OK Note: Command is valid