Specifications

Chapter 15 – Provisioning AT Commands
Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 103
Secondary CDMA Channels +WSCC
Description: This command is used to set the secondary CDMA channels for 800Mhz CDMA operation only. Values
entered must be valid CDMA 800Mhz Channel numbers.
Values: <channel a number> Value range: 0 – 2047
<channel b number> Value range: 0 – 2047
Syntax: Command syntax: AT+WSCC=<channel a number>,<channel b number>
Command Possible responses
AT+WSCC?
Note: Get current secondary CDMA channels
+WPCC: 691,777
OK
AT+WPCC=511,632
Note: Set the secondary CDMA channels
OK
Service Option Management +WSOM
Description: This command is used to manage Service Options for EVRC. It will allow the user to enable EVRC, set
home page, home origination, and roam origination voice service options for the current NAM. It is only
available for software builds, which include EVRC Service Option Management feature.
Values: <enable>
0 disable EVRC
1 enable EVRC
<home page SO>
0 IS96A
1 EVRC
2 13k
3 IS96
4 WILDCARD
<home orig SO> & <roam orig SO>
0 IS96A
1 EVRC
2 13k
3 IS96
Syntax: Command syntax: AT+WSOM=<enable>,<home page SO>,<home orig SO>,<roam orig SO>
Command Possible Responses
AT+WSOM?
Note: Get the Service Options
of the current NAM
+WSOM: 0, 1, 2, 0
OK
Note: EVRC disabled, home page is set to EVRC, home
orig is set to 13k, roam orig is set to IS96A
AT+WSOM=1,4,2,2
Note: Set current NAM Service
Options
OK
Note: EVRC enabled, set home page to WILDCARD, set
home orig to 13k, set roam orig to 13k