Specifications

Chapter 6 – Identification Commands
Multi-Tech Systems, Inc. AT Commands for EDGE (E1) Modems (S000474A) 87
Chapter 6 – Identification
Commands
The AT Commands described in this chapter allow the external application to obtain various identification information
related to the Multi-Tech wireless modem and linked entities.
6.1 ATI Display Product Identification Information
Description: The ATI execute command delivers a product information text.
The ‘Revision’ information consists of the following parts: Version xx and variant yy of
software release.
Syntax: Exec Command: ATI
Response: Cinterion
MC75i
REVISION xx.yy
OK
Exec Command: ATI[<value>]
Response: OK
Exec Command: ATI1
Response: Cinterion
MC75i
REVISION xx.yy
A-REVISION xx[.zzz.cc]
OK
Parameter: <value> Values are not support and only return OK.
Notes:
• "A-REVISION xx.zzz.cc" information consists of the following parts:
Application Revision Number 'xx' as an assignment to customer application.
Application Revision Version 'zzz' as an assignment to changes in customer application.
'cc' as an additional number, e.g. defined by customer.
• "A-REVISION 01" is returned as an assignment to no customer application.
• This command is not PIN protected.
• This command is supported in airplane mode.
6.2 AT+CGMI Request Manufacturer Identification
Description: AT+CGMI returns a manufacturer identification text. See also: AT+GMI.
Syntax: Test Command: AT+CGMI=?
Response: OK
Exec Command: AT+CGMI
Response: Cinterion
OK
Notes:
• This command is not PIN protected.
• This command is supported in airplane mode.