Specifications

Chapter 3 – Status Control Commands
Multi-Tech Systems, Inc. AT Commands for EDGE (E1) Modems (S000474A) 63
3.6 AT+CPAS Mobile Equipment Activity Status
Description: The AT+CPAS execute command indicates the activity status of the ME.
Syntax: Test Command: AT+CPAS=?
Responses: +CPAS: (list of supported<pas>s)
OK
Exec Command: AT+CPAS
Responses: +CPAS: <pas>
OK
Parameter:
<pas>
0 Ready
3 Incoming call (ringing)
4 Call in progress or call hold
Notes:
• This command is not PIN protected
• This command is supported in airplane mode
3.7 AT+WS46 Select Wireless Network
Syntax: Test Command: AT+WS46=?
Responses: +WS46: (list of supported<n>s)
OK
Read Command: AT+WS46?
Responses: <n>
OK
Write Command: AT+WS46=[<n>]
Responses: OK
ERROR
+CME ERROR: <err>
Parameter:
<n>
12 GSM digital cellular
Notes:
• This command is not PIN protected
• This command is supported in airplane mode